Bed Adhesion | Not Sticking | Skirting

Your model is crashed while printing

Like above left model  as model started wobbling with nozzle  but again you have got your model with successive printing like above right side model.

So you never want to crash your model any time in future .

                --Bed Adhesion -- 

Your model get print on the bed of 3d printer and it sticks on the bed so that model can  maintain it's position constantly during final Printing time.

For any reason if your model don't stick on the bed your model will not be printed correctly.

                  -- use of glue--

So use any glue for sticking if bed is not heated .

                 -- temperature--

If bed is heated play with bed temprature .

                  -- leveling--

Through levelling you can adjust the gap between the nozzle and the bed.

In this gap melted material will be filled during printing if gap is too low or too far then with both condition you will get problem and model will not be printed completely.

For more detail on 3d printing 

Visit our youtube channel--

                   Vfxpoint